Getting Started - TechniSat DIGITRADIO 20 Instruction Manual

Getting Started

Carefully remove your radio from the box. You may wish to store the packaging for future use.
What you can find inside of your package
n Main unit x 1
n Instruction Manual x 1
n Power adapter x 1
n Fixing plate x 1
n Fixing screws x 5
Positioning your Radio
There are two ways to place your radio - placing on a flat / stable surface or mounting under a
cupboard.
Avoid the following locations:
Where the radio will be exposed to direct sunlight.
n
n Where the radio will be close to heat radiating sources.
n Where the humidity is high and ventilation is poor.
Where it is dusty.
n
n Where it is damp or there is a possibility of water dripping or splashing onto unit.
Place the Unit on a Table
Installing the Unit under a Cupboard
Make sure removing all connections from unit.
1. Install the Fixing plate under cupboard with the supplied Fixing screws. (See Figure 1)
2. Mount the unit to the installed Fixing plate. (See Figure 2 and 3)
5