Getting Started - TechniSat DigitRadio 110 IR Instruction Manual

Internet, dab/dab+ and fm digital radio with bluetooth technology and spotify and multi-room features
Hide thumbs Also See for DigitRadio 110 IR:
Table of Contents

Advertisement

DigitRadio 110 IR

Getting Started

Carefully remove your radio from the box. You may wish to store the packaging for future use.
What you can find inside of your package
!
Main unit
!
Instruction manual
!
Remote control and AAA alkaline batteries
!
Power adapter
!
DAB/FM antenna
!
RCA cable
Positioning your Radio
Place your radio on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:
!
Where the radio will be exposed to direct sunlight.
!
Where the radio will be close to heat radiating sources.
!
Where the humidity is high and ventilation is poor.
!
Where it is dusty.
!
Where it is damp or there is a possibility of water dripping or splashing onto unit.
Wireless LAN Setting
"
A broadband Internet connection.
"
A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.
"
If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected
Access (WPA) data encryption then you need to know the WEP or WPA code so you can get the
Internet Radio to communicate with the network.
"
If your wireless network is configured for trusted stations you will need to enter the Radio's MAC
address into your wireless access point. To find the Radio's MAC address use menu items as
follows: Main menu > System settings > Network > View settings > MAC address.
Before you continue, make sure that your wireless access point is powered up and connected to your
broadband Internet. To get this part of the system working, read the instruction supplied with the
wireless access point is highly recommended.
Adjusting the Antenna
Unwind the DAB/FM antenna and screw it to Antenna socket on the back of the unit to ensure you
receive the best reception possible in both DAB and FM radio modes. It may be necessary to adjust
the position of the radio and /or antenna to achieve the best signal.
Using Optical Cable
Connect a fiber-optical digital cable to Optical Out socket on the back of the unit will allow your radio
transmitting digital signal to audio equipment.
TechniSat
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents