Control Modes; Ild Show - SHOWTEC galactic RGB 720 User Manual

Galactic RGB 720

Control Modes

01) While in the main menu, turn the MENU control and select MODE.
02) Press the MENU control to enter the control modes menu. The following screen will pop up:
There are 5 control modes to choose from. Those are:
A.

ILD show

B. PRG ILD List
C. Built-in show
D. DMX
E. Sound Active
03) Turn the MENU control to select one of the modes enumerated above and press the MENU control to
activate.
04) Once you have activated the desired mode, you will notice a check mark next to its name (see
picture above)
05) Now turn the MENU control to the right, choose Exit and press the MENU control.
06) The device operates now in the mode which you have chosen.
Below is a description of all the control modes available on the device.
A. ILD show
Note: ILD mode will function only if the included SD card has been inserted into the SD slot on the rear
panel.
01) Turn the MENU control to the left or right to choose the desired .ild file (the full list of .ild folders and
files, see page 29).
02) Once you have chosen the desired .ild file, press the MENU control.
Ordercode: 51340
19