US Robotics 56K USB Modem User Manual page 96

Table 204. #UD Last Call Status Report Format
Note: Refer to Table 1 in the Microsoft specification.
Key Value(s) Required
0 2 digits
1 See
Table 205
on page 92.
2 See Table
3*
3 See Table
4*
4 String
5 String
6—F —
10 2 digits
11 2 digits
12 2 digits
13 2 digits
14 2 digits
15 2 digits
16 4 digits
17 —
18 —
19— —
1F
20 See
Table 206
on page 92.
21 See Table
206.
22 4 digits 0—1F40
23 4 digits 0—1F40
24 4 digits
25 4 digits
26 4 digits 0—FA00
27 4 digits 0—FA00
28— —
2F
30 2 digits
31 2 digits
32 2 digits
33 2 digits
* Refers to notes or tables in the Microsoft specification.
Yes Diagnostic command specification revision number,
digit.digit.
0—A Call setup result code.
0—1 Multimedia mode.
0 DTE-DCE interface mode.
Yes V.8 CM octet string. Same format as V.25ter Annex A,
in quotes.
Yes V.8 JM octet string. Same format as V.25ter Annex A
in quotes.
— Reserved for call negotiation reports.
Note 4* Received signal power level in –dBm (0—43).
Note 4* Transmit signal power level in –dBm (0—17).
Note 4* Estimated noise level in –dBm (10—90).
Normalized mean squared error. 100 (0x64) = mini-
Note 4*
mum intersymbol distance.
Note 4* Near echo loss in dB.
Far echo loss in dB.
Note 4*
Note 4* Far echo delay in ms.
Note 4*
Note 4*
— Reserved for modulation setup and training reports
(see note 5*).
Transmit carrier negotiation result.
Note 6*
Note 6* Receive carrier negotiation result.
Transmit carrier symbol rate (0—8000).
Receive carrier symbol rate (0—8000).
0—FA0 Transmit carrier frequency (0—4000).
Receive carrier frequency (0—4000).
0—FA0
Initial transmit carrier data rate (0—64000).
Initial receive carrier data rate (0—64000).
— Reserved.
0—FF Temporary carrier loss event count.
0—FF Carrier rate renegotiation event count.
Carrier retrains requested.
0—FF
Carrier retrain requests granted.
0—FF
Definition
—
—
56K USB Modem
User Guide
Implemented
X
X
—
—
—
—
—
X
X
X
—
X
X
—
X
—
—
X
X
X
X
—
—
X
X
—
—
—
X
X
Command Reference - 90