US Robotics 56K USB Modem User Manual page 34

Blind Dial Pause
NoAnswer Timeout
"," Pause Time
Press any key to continue; ESC to quit.
Option
No Carrier Disc
DTMF Dial Speed
Escape GuardTime
Data Calling Tone
LineRate
Press any key to continue; ESC to quit.
Stored Phone Numbers
&Z0=9725551356
&Z1=6095553367
&Z2=6105558625
OK
&W<value>—Store Current Configuration
Use this command to store the modems command options and all S registers except S3, S4, and S5. The
Z0
command or a powerup reset of the modem restores this profiles.
Note: This command is not valid during a cellular call.
Result codes:
• OK if <value> = 0.
ERROR if <value> ≠ 0.
•
Table 36. &W<value> Commands
Command
&W0 Stores the current configuration as profile 0.
&Y<value>—Select Stored Profile for Hard Reset
This command is supported to ensure backward compatibility with communications software that issues
the &Y0 command. The &Y1 version of this command is not supported. There is only one stored profile.
Result codes:
• OK if <value> = 0.
ERROR if <value> ≠ 0.
•
Table 37. &Y<value> Commands
Command
&Y0 Selects stored profile 0 on powerup.
Function
Function
2 sec
50 sec
2 sec
Selection
2000 msec
95 msec
1000 msec
Disabled
33600
56K USB Modem
User Guide
S6
S7
S8
AT Cmd
S10
S11
S12
S35
S37
Command Reference - 28