US Robotics 56K USB Modem User Manual page 65

Table 132. +FCC Valid Parameter Values(Continued)
Label Values
LN 0 A4, 297 mm
1 B4, 364 mm
2 Unlimited length (default)
DF 0 1-D Modified Huffman (Rec. T.4)
1 (default)
2 2-D Modified read (Rec. T.4)
3 2-D Uncompressed mode (Rec.
T.4)
2-D Modified modified read (Rec.
T.6)
+FCI—DCE Reports Received Remote CSI ID
A +FCI response from DCE to DTE reports the identification of the called station. The syntax of the
response is as follows:
+FCI:<CSI ID string>, where CSI ID string is the remote facsimile's identification.
Result codes:
• NA
+FCLASS=<value>—Enter Class 1, Class 1.0, Class 2, Class 2.0, or Class 2.1 FAX
Mode
The +FCLASS=1 command (+FCLASS=<value>—Service Class Indication on page 44) puts the modem
in FAX mode class entered in value. The +FCLASS=1.0 (ITU T.32) command puts the modem in class 1.0
FAX mode. The +FCLASS=2 (ITU T.32) command puts the modem in class 2 FAX mode. The
+FCLASS=2.0 (ITU T.32) command puts the modem in class 2.0 FAX mode. The +FCLASS=2.1 (ITU
T.32) command puts the modem in class 2.1 FAX mode.
Result codes:
• OK if <value> = 0, 1, 1.0, 2, 2.0, 2.1, 8.
ERROR <value> ≠ 0, 1, 1.0, 2, 2.0, 2.1, 8.
•
Table 133. +FCLASS Values
Commands
+FCLASS=0
+FCLASS=1
+FCLASS=1.0
+FCLASS=2
+FCLASS=2.0
+FCLASS=2.1
+FCLASS=8
Description
Selects the modem's data mode.
Selects the modem's class 1 FAX mode.
Selects the modem's class 1.0 FAX mode.
Selects the modem's class 2 FAX mode.
Selects the modem's class 2.0 FAX mode.
Selects the modems class 2.1 FAX mode.
Selects the modem's voice mode.
Label Values
JT 00 Disable JPEG coding
01 Enable JPEG coding (Rec. T.81)
02 Full color mode
04 Enable preferred Huffman tables
08 (Note 5)
10 12 bits/pel/component
20 No subsampling (1:1:1)
40 Custom illuminant
Custom gamut range
Description
56K USB Modem
User Guide
Description
Command Reference - 59