US Robotics 56K USB Modem User Manual page 82

+FTM=<mod>—Transmit FAX Data with <mod> Carrier
+FTM=<mod> command causes the modem to transmit data using the modulation defined by Table 169.
Result codes:
• CONNECT if <mod> = 3, 24, 48, 72—74, 96—98, 121, 122, 145, 146, and the connection is estab-
lished. This is an intermediate result code.
• OK if <mod> = 3, 24, 48, 72—74, 96—98, 121, 122, 145, 146, and the connection is established. This
is a final result code.
≠
• ERROR if <mod>
lished. This is a final result code.
Table 169. +FTM Commands
Command
+FTM=3
+FTM=24
+FTM=48
+FTM=72
+FTM=96
+FTM=73
+FTM=74
+FTM=97
+FTM=98
+FTM=121
+FTM=122
+FTM=145
+FTM=146
Table 170. +FTM Extended Syntax Commands
Command
+FTM=<mod>
+FTM=?
+FTS=<value>—Transmission Silence
+FTS=<value> causes the modem to terminate a transmission and wait for <value> x 10 ms before
responding with the OK result code. For example, <value> = 5 results in a 50 ms interval. <value> has a
range of 0—255.
Result codes:
• OK if <value> = 0—255.
≠
• ERROR if <value>
3, 24, 48, 72—74, 96—98, 121, 122, 145, 146, or the connection is not estab-
Modulation
V.21 channel 2.
V.27ter.
V.27ter.
V.29.
V.29.
V.17.
V.17 (short train).
V.17.
V.17 (short train).
V.17.
V.17 (short train).
V.17.
V.17 (short train).
Sets FAX transmit rate.
Displays all available parameter values for the +FTM command.
.
0—255
Speed
300 bits/s.
2400 bits/s.
4800 bits/s.
7200 bits/s.
9600 bits/s.
7200 bits/s.
7200 bits/s.
9600 bits/s.
9600 bits/s.
12000 bits/s.
12000 bits/s.
14400 bits/s.
14400 bits/s.
Description
Command Reference - 76
56K USB Modem
User Guide