US Robotics 56K USB Modem User Manual page 126

Table 229. FAX Class 1/Class 1.0/Class 2/Class 2.0/2.1 Commands Summary(Continued)
Command
+FIT
+FKS
+FLI
+FLO
+FLP
+FMI
+FMM
+FMR
+FMS
+FNC
+FNF
+FNR
+FND
+FNS
+FPA
+FPI
+FPO
+FPP
+FPR
+FPS
+FPW
+FRH
+FRM
+FRQ
+FRS
+FRY
+FSA
+FSP
+FTC
+FTI
+FTH
+FTM
+FTS
+FVO
* All references are ITU-T recommendations unless otherwise noted.
Note: The description of the V.92 and V.44 commands is based on the
ITU-T Recommendation V.250 prerelease for V.92 and V.44.
DTE inactivity timer (not supported
Session termination command
DCE transmits local ID string, TSI or CSI
Set DTE-DCE flow control
DTE document to poll indicator
Manufacturer identification.
Product identification.
Version/revision information.
Minimum Phase C speed control
Response reporting nonstandard command (NSC)
Response reporting nonstandard facilities (NSF)
Negotiation message reporting control parameters
Nonstandard message data indication
Response reporting nonstandard setup (NSS)
Selective polling address
Report remote ID, CIG
Remote document available for polling indicator
DCE-DTE packet protocol control
Set DTE-DCE FAX port rate
T.30 Phase C page reception
PassWord (sending or polling)
Receive HDLC data with n carrier
Receive FAX data with n carrier
Receive quality thresholds
Receive silence
ECM retry count
Destination subaddress
Request to poll
Response reports remote capabilities and intentions
Response reports remote ID
Transmit HDLC data with n carrier
Transmit FAX data with n carrier
Transmission silence
Transition to voice (not supported)
Function
USRobotics
's implementation of the commands specified in
56K USB Modem
User Guide
*
Reference
T.32 (08/95)
T.32 (08/95)
—
T.31 (08/95)
T.32 (08/95)
T.31 (08/95)
T.31 (08/95)
T.31 (08/95)
T.32 (08/95)
T.32 (08/95)
T.32 (08/95)
T.32 (08/95)
T.32 (08/95)
T.32 (08/95)
T.32 (08/95)
T.32 (08/95)
T.32 (08/95)
T.32 (08/95)
T.31 (08/95)
T.32 (08/95)
T.32 (08/95)
T.31 (08/95)
T.31 (08/95)
T.32 (08/95)
T.31 (08/95)
T.32 (08/95)
T.32 (08/95)
T.32 (08/95)
T.32 (08/95)
T.32 (08/95)
T.31 (08/95)
T.31 (08/95)
T.31 (08/95)
T.32 (08/95)
Command Reference - 120