Sip Turn Password; Sip Turn Server; Sip Turn Username; Sip Type - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

SIP Turn Server

Define the address of the TURN (Traversal Using Relay NAT) server. It is used as a media
relay fallback and it is also used to discover the endpoint's own public IP address.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 255)
The preferred format is DNS SRV record (e.g. _turn._udp.<domain>), or it can be a valid
IPv4 or IPv6 address.

SIP Turn UserName

Define the user name needed for accessing the TURN server.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 128)
A valid user name.

SIP Turn Password

Define the password needed for accessing the TURN server.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 128)
A valid password.
D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016.
Configuration Peripherals Maintenance

SIP Type

Enables SIP extensions and special behavior for a vendor or provider.
Requires user role: ADMIN
Default value: Standard
Value space: Standard/Cisco
Standard: Use this when registering to standard SIP Proxy (tested with Cisco
TelePresence VCS and Broadsoft)
Cisco: Use this when registering to Cisco Unified Communication Manager.

SIP URI

The SIP URI (Uniform Resource Identifier) is the address that is used to identify the video
system. The URI is registered and used by the SIP services to route inbound calls to the
system. The SIP URI syntax is defined in RFC 3261.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 255)
An address (URI) that is compliant with the SIP URI syntax.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
140
Administrator Guide
System settings System settings Appendices