Cisco TelePresence SX80 Administrator's Manual page 57

Cisco TelePresence SX80

Introduction
Set up the PresenterTrack feature
Step 2: Set the trigger zone
The trigger zone defines the area where presenter tracking is
triggered.
You cannot see the video from the room in the web interface.
An empty gray area represents the camera view and a dashed
rectangle represents the trigger zone. Watch the video
system screen to see the video from the room, together with
the same dashed rectangle as you see in the web interface.
• Adjust the size and location of the trigger zone to cover a
suitable area to detect a presenter's face. The change you
do on the video system's web interface is reflected on the
video system screen.
• The trigger zone must be large enough to detect a
presenter face. Have in mind that people are of different
heights.
Click Save.
D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016.
Configuration Peripherals Peripherals
(page 3 of 5)
Video system screen: See the video from the room when you set the trigger zone.
Web interface: Set the trigger zone.
Maintenance
Trigger zone
Stage area
The zoomed out overview image of the
room is represented by a blank box in
the video system's web interface.
Trigger zone
The dashed rectangle can be moved
around and re-sized. You can see the
same rectangle on the endpoint screen
when you define the trigger zone.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
57
Administrator Guide
System settings Appendices