Audio Output Hdmi [1; Audio Output Line [1 - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction
Audio Output HDMI [1..2] Mode
Define if the audio channel on the HDMI output connector shall be enabled.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: Disable the audio channel on the HDMI output.
On: Enable the audio channel on the HDMI output.
Audio Output Line [1..6] Channel
Define whether the Audio Line output is a mono signal or part of a multichannel signal.
Requires user role: ADMIN
Default value: Left
Value space: Left/Mono/Right
Left: The Audio Line output signal is the left channel of a stereo signal.
Mono: The Audio Line output signal is a mono signal.
Right: The Audio Line output signal is the right channel of a stereo signal.
Audio Output Line [1..6] Delay DelayMs
To obtain lip-synchronization, you can configure each audio line output with an extra delay
that compensates for delay in other connected devices, for example TVs and external
loudspeakers. The delay that you set here is either fixed or relative to the delay on the HDMI
output, as defined in the Audio Output Line [n] Delay Mode setting.
Requires user role: ADMIN
Default value: 0
Value space: Integer (0..290)
The delay in milliseconds.
D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016.
Configuration Peripherals Maintenance
Audio Output Line [1..6] Delay Mode
You may add extra delay to an audio line output with the Audio Output Line [n] Delay
DelayMs setting. The extra delay added is either a fixed number of milliseconds, or
a number of milliseconds relative to the detected delay on the HDMI output (typically
introduced by the connected TV).
Requires user role: ADMIN
Default value: Fixed
Value space: Fixed/RelativeToHDMI
Fixed: Any extra delay (DelayMs) added to the output, will be a fixed number of
millisecond.
RelativeToHDMI: Any extra delay (DelayMs) added to the output, will be relative to the
detected delay on the HDMI output. The actual delay is HDMI-delay + DelayMs. The
Audio Output Connectors Line [n] DelayMs status reports the actual delay.
Audio Output Line [1..6] Equalizer ID
Select the equalizer ID for the audio source that is connected to the output line.
Requires user role: ADMIN
Default value: 1
Value space: Integer (1..8)
Set the equalizer ID.
Audio Output Line [1..6] Equalizer Mode
Define the equalizer mode for the audio source that is connected to the output line.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: No equalizer.
On: Enable the equalizer for the audio output line.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
93
Administrator Guide
System settings System settings Appendices