Userinterface Settings; Userinterface Contactinfo Type; Userinterface Keytones Mode; Userinterface Language - Cisco TelePresence SX80 Administrator's Manual

Hide thumbs Also See for TelePresence SX80:
Table of Contents

Advertisement

Cisco TelePresence SX80
Introduction

UserInterface settings

UserInterface ContactInfo Type

Choose which type of contact information to show in the status field in the upper left corner
of the display and Touch controller.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/None/IPv4/IPv6/H323Id/H320Number/E164Alias/SipUri/SystemName/
DisplayName
Auto: Show the address which another system should dial to reach this video system.
The address depends on the default call protocol and system registration.
None: Do not show any contact information.
IPv4: Show the system's IPv4 address.
IPv6: Show the system's IPv6 address.
H323Id: Show the system's H.323 ID (refer to the H323 H323Alias ID setting).
H320Number: Show the system's H.320 number as contact information (only applicable
if connected to Cisco TelePresence ISDN Link).
E164Alias: Show the system's H.323 E164 Alias as contact information (refer to the H323
H323Alias E164 setting).
SipUri: Show the system's SIP URI (refer to the SIP URI setting).
SystemName: Show the system's name (refer to the SystemUnit Name setting).
DisplayName: Show the system's display name (refer to the SIP DisplayName setting).

UserInterface KeyTones Mode

You can configure the system to make a keyboard click sound effect (key tone) when typing
text or numbers.
Requires user role: ADMIN, USER
Default value: On
Value space: Off/On
Off: There is no key tone sound effect.
On: The key tone sound effect is turned on.
D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016.
Configuration
Peripherals
Maintenance

UserInterface Language

Select the language to be used in menus and messages on the screen and Touch
controller.
Requires user role: ADMIN, USER
Default value: English
Value space: English/ChineseSimplified/ChineseTraditional/Catalan/Czech/Danish/Dutch/
Finnish/French/FrenchCanadian/German/Hungarian/Italian/Japanese/Korean/Norwegian/
Polish/PortugueseBrazilian/Russian/Spanish/Swedish/Turkish/Arabic/Hebrew
Select a language from the list.

UserInterface OSD EncryptionIndicator

Define for how long the encryption indicator (a padlock) is shown on screen. The icon for
encrypted calls is a locked padlock, and the icon for non-encrypted calls is a crossed out
locked padlock.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/AlwaysOn/AlwaysOff
Auto: If the call is encrypted, a "Call is encrypted" notification is shown for 5 seconds,
while the encryption indicator icon is shown for the duration of the call.
If the call is not encrypted, a "Call is not encrypted" notification is shown for 5 seconds.
Also the encryption indicator icon disappears from screen after 5 seconds.
AlwaysOn: The encryption indicator is displayed on screen during the entire call.
AlwaysOff: The encryption indicator is never displayed on screen.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
146
Administrator Guide
System settings
System settings
Appendices

Advertisement

Table of Contents
loading

Table of Contents