H323 Settings; H323 Authentication Loginname; H323 Authentication Mode; H323 Authentication Password - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

H323 settings

H323 Authentication Mode

Define the authenticatin mode for the H.323 profile.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: The system will not try to authenticate itself to a H.323 Gatekeeper, but will still try a
normal registration.
On: If an H.323 Gatekeeper indicates that it requires authentication, the system will try
to authenticate itself to the gatekeeper. Requires the H323 Authentication LoginName
and H323 Authentication Password settings to be defined on both the codec and the
Gatekeeper.

H323 Authentication LoginName

The system sends the H323 Authentication Login Name and the H323 Authentication
Password to an H.323 Gatekeeper for authentication. The authentication is a one way
authentication from the codec to the H.323 Gatekeeper, i.e. the system is authenticated to
the gatekeeper. If the H.323 Gatekeeper indicates that no authentication is required, the
system will still try to register. Requires the H.323 Authentication Mode to be enabled.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 50)
The authentication login name.
D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016.
Configuration Peripherals Maintenance

H323 Authentication Password

The system sends the H323 Authentication Login Name and the H323 Authentication
Password to an H.323 Gatekeeper for authentication. The authentication is a one way
authentication from the codec to the H.323 Gatekeeper, i.e. the system is authenticated to
the gatekeeper. If the H.323 Gatekeeper indicates that no authentication is required, the
system will still try to register. Requires the H.323 Authentication Mode to be enabled.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 50)
The authentication password.

H323 CallSetup Mode

Defines whether to use a Gatekeeper or Direct calling when establishing H.323 calls.
Direct H.323 calls can be made also when H323 CallSetup Mode is set to Gatekeeper.
Requires user role: ADMIN
Default value: Gatekeeper
Value space: Direct/Gatekeeper
Direct: You can only make an H.323 call by dialing an IP address directly.
Gatekeeper: The system uses a Gatekeeper to make an H.323 call. When choosing this
option, the H323 Gatekeeper Address must also be configured.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
109
Administrator Guide
System settings System settings Appendices