Removing A Module - Avaya 8800 Maintenance Manual
Ethernet routing switch
Hide thumbs
Also See for 8800:
- Troubleshooting manual (484 pages) ,
- Planning and engineering, network design (327 pages) ,
- Planning and engineering (306 pages)
Table of Contents
Advertisement
Procedure steps
1. Using a Phillips screwdriver, loosen the two captive screws that fasten the filler
2. Pull the filler panel away from the slot.
Removing a module
Remove a module to clean the chassis slots or backplane.
Removing a module takes three to five minutes.
Routine Maintenance
panel to the chassis as shown the following figures.
The first figure shows the 8003-R, 8006, and 8010 chassis and the second figure
shows the 8010co chassis.
Removing a module
March 2011
37
Advertisement
Table of Contents
