Avaya 8800 Maintenance Manual page 76
Ethernet routing switch
Hide thumbs
Also See for 8800:
- Troubleshooting manual (484 pages) ,
- Planning and engineering, network design (327 pages) ,
- Planning and engineering (306 pages)
Table of Contents
Advertisement
DC power supply replacement
7. Make sure that the +DC cable is always connected to the positive terminal and the
8. Attach the earth ground lead to the ground stud on the power supply.
76
Routine Maintenance
Either +VDC or –VDC can be referenced to the frame ground for +48 VDC (nominal)
or –48 VDC (nominal) applications.
–DC cable is always connected to the negative terminal.
Danger:
Risk of injury by electric shock
Before you continue with this procedure, ensure that the DC power source is
switched off.
Use the washers in the following order:
• flat washer
• crimp lug
March 2011
Advertisement
Table of Contents
