Removing The Air Bezel - Avaya 8800 Maintenance Manual

8010co chassis air filter installation navigation
•

Removing the air bezel

• Installing the air filter
• Mounting the air bezel
Removing the air bezel
Remove the air bezel from the chassis to access the air filter.
This procedure applies to the following air bezel models:
• 312096-A
• 321325-A
Procedure steps
1. Use a Phillips screwdriver to loosen the two captive screws that secure the bezel
2. Pull the top of the bezel forward.
3. To remove air bezel 312096-A, lift the bezel from the tabs at the bottom of the
Routine Maintenance
on page 97
on page 99
on page 100
to the chassis.
chassis.
The following figure shows how to remove the bottom bezel 312096-A.
8010co chassis air filter installation procedures
March 2011 97