Please note, the data must be entered in the unit displayed at the
time the setting is made.
Setting the barometric pressure: The default is the official Eu-
ropean unit hPa. However, you may also select the unit inch of mer-
cury (inHg). When changing the unit at this time the indicated value
will automatically be converted to the new unit.
Temperature alarm
You have the option to define a temperature range for the outdoor sen-
sor. With the temperature alarm activated, the base station will sound an
alarm if the outdoor sensor measures a temperature outside of this tem-
perature range.
Activating the temperature alarm
Press and hold the ALERT button
perature display flashes in the outdoor temperature field
flashing up arrow ▲ will appear to the left of the temperature.
Now press the UP button
maximum temperature for the desired temperature range.
TIP: Press and hold the UP button or the DOWN/ -button to
quickly scan ahead or back through the numbers.
Confirm the value by pressing the ALERT button. The temperature
display will now flash again and a down arrow ▼ will start flashing.
Press the UP button or the DOWN/ -button to now set the minimum
temperature for the desired temperature range.
Confirm the value by pressing the ALERT button.
The temperature range is now set.
24 GB/CY
91679_aur_Funk-Wetterstation_Content_RO.indd 24
for three seconds until the tem-
18
or the DOWN/ -button
14
. A
24
to set the
15
28.06.13 11:57