Settings; Basic Settings - Auriol IAN 91679 Operation And Safety Notes

Settings

ATTENTION: Firmly touching the top of the housing will turn on the
backlight (Fig. E). Five seconds after releasing it the display backlight will
turn off again.
Please note, the base station does not respond to two buttons being
pressed at once. Hence, if the unit does not respond to a button being
pressed, you are probably also pressing the SNOOZE/LIGHT field. Re-
lease when this occurs!

Basic settings

Press and hold the SET/HISTORY button
the basic settings.
Pressing the UP button
now change the respective flashing value.
TIP: Pressing and holding the UP button or the DOWN/ -button will
quickly scan ahead or back through the numbers .
ATTENTION: When no buttons are pressed for approx. 8 seconds the
base station will return to base mode.
Briefly pressing the SET/HISTORY button will confirm the setting and
switch to the next option in the clock settings.
This allows you to change the following settings in sequence:
Note: If the weather station has received the DCF signal the year,
month, day, hour and minute settings will remain unchanged. If you are
in a different time zone than Germany you may set your local time under
time zone.
22 GB/CY
91679_aur_Funk-Wetterstation_Content_RO.indd 22
13
or the DOWN/ -button
14
for 3 seconds to change
allows you to
15
28.06.13 11:57