Accessing Stored Data; Activating The Alarm; Maximum Temperatures - Auriol IAN 91679 Operation And Safety Notes

Activating the alarm

In clock mode press the DOWN-/- button
time a bell will appear with 1:
the DOWN/ -button again and the alarm symbol 1 will disappear.
Alarm symbol 2: .will appear. Pressing the DOWN/ -button
again will activate alarm 1 and alarm 2. Both alarm symbols will ap-
pear:
Pressing the DOWN/ -button a fourth time will deactivate both
alarm 1 and alarm 2.
Switching off the alarm
The alarm will sound at the set time and the backlight will switch on.
When not switched off, the alarm will sound for 2 minutes before
stopping automatically.
Press the SNOOZE-/LIGHT field
display will flash
vated: the alarm will sound again after 5 minutes.
Press any button on the keypad to actually shut off the alarm.

Accessing stored data

Maximum temperatures

Press the MEM button again and both temperature fields will show
and
24
spective maximum indoor and outdoor value will be shown. Press the
MEM button twice and MIN will appear next to the temperature, and
the respective lowest indoor and outdoor value will be shown. After 5
seconds the current values will again be displayed.
26 GB/CY
91679_aur_Funk-Wetterstation_Content_RO.indd 26
, indicating the snooze function has been acti-
next to the temperature, and MAX next to the humidity. The re-
. In addition to the
15
. Alarm 1 is now activated. Press
to interrupt the alarm. The clock
2
23
28.06.13 11:57