The Pumping Speed Is Poor; There Is An External Oil Leak - Edwards RV3 Instruction Manual
Rotary vane pumps
Hide thumbs
Also See for RV3:
- Instruction manual (64 pages) ,
- Parts and maintenance manual (22 pages) ,
- Instruction manual (12 pages)
Table of Contents
Advertisement
A652–01–880 Issue S
5.12.7
The pumping speed is poor
The connecting pipelines are too small in diameter
The connecting pipelines are too long
The inlet-filter is blocked.
5.12.8
There is an external oil leak
The outer shaft-seal is worn or damaged
The oil-box gaskets have deteriorated
There is an oil leak from the gas-ballast control
There is an oil leak from the drain-plug
There is an oil leak from the sight-glass
Page 40
© Edwards Limited 2007. All rights reserved.
Edwards and the Edwards logo are trade marks of Edwards Limited.
- Quick Links:
- Fill the Pump with Oil
- Replace the Oil
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RV3 and is the answer not in the manual?
Questions and answers