Gps Service - GE MDS ORBIT MCR Technical Manual

routing-state bgp neighbor PRIMARY-HUB
routing-instance inet.main
state up
preference 100
import-filter ACCEPT
export-filter LOCAL-LAN
statistics import-updates-received 1
statistics import-updates-rejected 0
statistics import-updates-filtered 0
statistics import-updates-ignored 0
statistics import-updates-accepted 1
statistics import-withdraws-received 0
statistics import-withdraws-rejected 0
statistics import-withdraws-ignored 0
statistics import-withdraws-accepted 0
statistics export-updates-received 8
statistics export-updates-rejected 1
statistics export-updates-filtered 6
statistics export-updates-accepted 1
statistics export-withdraws-received 0
statistics export-withdraws-accepted 0
local-state established
peer-address
peer-as 65500
peer-id 172.16.0.1
local-address
hold-time 23/30
keepalive-time 7/10
3.8.22

GPS Service

Understanding
A unit may be equipped with internal GPS support. The GPS service obtains location information from
the GPS sources in the system and makes it available as status data to all northbound management
interfaces like CLI/SSH, NETCONF, SNMP and WebUI. As of this writing, GPS service supports
following data sources on MCR and ECR:

Standalone GPS receiver in 4G cellular modules (4Gx in the model string).
The following table below displays the approved GPS antennas that can be used.
Table 3-22. Approved GPS Antenna Types
MDS 05-6632A01, Rev. F
172.16.0.1
172.16.0.3
MDS Orbit MCR/ECR Technical Manual 355