Https - GE MDS ORBIT MCR Technical Manual


IPv6 Bind IPs - Restrict the server to only listen for connections on the specified IPv6 addresses. If
not present, or empty, the server will listen on all IPv6 addresses.

HTTPS


Enabled - Enable (Default) or Disabled Service.

Port - The port to listen to HTTPS connections on Valid values: 0—65535 -Default: 443

IPv4 Bind IPs - Restrict the server to only listen for connections on the specified IPv4 addresses. If
not present, or empty, the server will listen on all IPv4 addresses.

IPv6 Bind IPs - Restrict the server to only listen for connections on the specified IPv6 addresses. If
not present, or empty, the server will listen on all IPv6 addresses.

TLS Certificate - The certificate to use for the HTTPS server. If empty or not present, a self-signed
certificate/key pair will be used.

TLS Private Key - The private key which matches the specified TLS-certificate. If empty or not
present, a self-signed certificate/key pair will be used.
As show in the screen above both HTTP and HTTPS web services can be used to manage the MCR.
Click Add an Entry next to IPv4 Bind IPs or IPv6 Bind IPs in each submenu to access a dropdown box
containing all IP addresses on the device. Select the IP address belonging to the appropriate interface, and
click Add.
Once configuration is complete, click Save.
Web UI - SNMP Configure
To configure SNMP to listen only to a specific address, navigate to SNMP Agent ---> Basic Config.
278
Figure 3-196. HTTP Restricted IP
MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F