Cell Interface Status Screen - GE MDS ORBIT MCR Technical Manual

% set interfaces interface Cell cell-config connection-profile CARRIER_B bearer-config apn
carrierB.apn
% set interfaces interface Cell cell-config connection-profile CARRIER_B sim-slot SIM-B

Enable connection profile switching on connection failure
% set interfaces interface Cell cell-config switch-to-next-on-failure true

Enable cell and commit configuration
% set interfaces interface Cell enable true
% commit
NOTE
Dual SIM functionality is a selective order-entry feature. Default units are shipped with only
SIM-A enabled; SIM-B is not supported.
Monitoring
From the Web UI, status of the cell module can be reviewed on the page:
Interfaces / Cell ---> Status / General

Type - The type of the interface

Admin Status - The desired state of the interface.

Oper Status - The current operational state of the interface.

If Index - The if Index value for the if Entry represented by this interface. Valid values: 1—
2147483647

Phys Address - The interface's address at its protocol sub-layer. For example, for an 802.x
interface, this object normally contains a MAC address.
MDS 05-6632A01, Rev. F
Figure 3-26. Cell Interface Status Screen
MDS Orbit MCR/ECR Technical Manual 71