Web Ui - Ssh Configure; Accessing The Snmp Menu; Ssh Menu - GE MDS ORBIT MCR Technical Manual

Click Add an Entry next to IPv4 Bind IPs or IPv6 Bind IPs in the Agent submenu to access a
dropdown box containing all IP addresses on the device. Select the IP address belonging to the
appropriate interface, and click Add. Once configuration is complete, click Save.

Web UI - SSH Configure

To configure SSH to listen only to a specific address, navigate to SSH Server ---> Basic Config.

Enabled - Whether or not to run the netconf server. Default = true

Port - The port to listen to netconf connections on. Default=830

IPv4 Bind IPs - Restrict the server to only listen for connections on the specified IPv4 addresses. If
not present, or empty, the server will listen on all IPv4 addresses.

IPv6 Bind IPs - Restrict the server to only listen for connections on the specified IPv6 addresses. If
not present, or empty, the server will listen on all IPv6 addresses.
MDS 05-6632A01, Rev. F
Figure 3-197. Accessing the SNMP menu
Figure 3-198. SSH Menu
MDS Orbit MCR/ECR Technical Manual 279