If you wish to...
Monitor WiFi Status
View the routing table
View the event log
Set the admin user's
password
Set the device name
Set the baud rate on COM1
Download a firmware
package from TFTP server at
192.168.1.10
Monitor firmware
reprogramming status
Export configuration file to a
TFTP server at 192.168.1.10
Reboot device to firmware
inactive image
54
Table 3-3. CLI Quick Reference Table
> show interfaces-state interface Wi-Fi wifi-status | repeat 5
> show routing
> show table logging event-log
> request system authentication change-password user admin
password admin1234
% set system name "Mydevice"
% set services serial ports COM1 baud-rate b19200
> request system firmware reprogram-inactive-image filename
mcr-bkrc-4_0_0.mpk manual-file-server { tftp { address
192.168.1.10 } }
> show system firmware reprogram-status
> request system configuration-files export filename
myConfig.xml manual-file-server { tftp { address 192.168.1.10 } }
> request system power restart inactive
MDS Orbit MCR/ECR Technical Manual
Enter this CLI command:
MDS 05-6632A01, Rev. F