Verify Image Monitoring - GE MDS ORBIT MCR Technical Manual

The verification status contains the following items:

Current State – The status of the verification task:
- inactive
- processing
- complete
- failure

Detailed Message – The details regarding the operation, such as "Verifying host firmware
image"

Size – The total number of bytes in the image (not displayed on the web UI)

Bytes Transferred – The number of bytes already processed (not displayed on the web UI)

Percent Complete – The percentage complete for the operation
To view the status of the verification process in the CLI, ensure the CLI is in operational mode and then
follow the example below:
> show system firmware verify-image-status
system firmware verify-image-status state complete
system firmware verify-image-status detailed-message "Successfully verified host
firmware image"
system firmware verify-image-status size 38043384
system firmware verify-image-status bytes-transferred 38043384
system firmware verify-image-status percent-complete 100
Configuring - Copy
To copy the active firmware image to the inactive firmware image, navigate to the Copy Image section
and click on the Begin Copying button to begin.
176
Figure 3-90. Verify Image Monitoring
MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F