Copy Image; Copy Image Monitoring - GE MDS ORBIT MCR Technical Manual

The following example shows how to have the device copy the active firmware image to the inactive
firmware image from the CLI:
> request system firmware copy-image
Monitoring - Copy
Once the copying is begun, the current status of the copying process is displayed on the web page. Note
that the web page does not display the current status if the device has not been instructed to copy the
firmware image (in other words, if the state is "inactive").
The copy status contains the following items:

Current State – The status of the copying task:
- inactive
- processing
- complete
- failure

Detailed Message – The details regarding the operation, such as "Copying host firmware
image"

Size – The total number of bytes in the image (not displayed on the web UI)

Bytes Transferred – The number of bytes already processed (not displayed on the web UI)
MDS 05-6632A01, Rev. F
Figure 3-91. Copy Image
Figure 3-92. Copy Image Monitoring
MDS Orbit MCR/ECR Technical Manual 177