Table of Contents
Advertisement
From the CLI the command can be issued as follows:
> request system tamper-detection clear-alarms
3.7.7
Configuration Files
Understanding
An exported configuration script will contain all of the settable parameters of the unit for which the
current user has read-access. For example, configuration scripts exported by the tech user will not contain
values which only the admin user has permissions to view. Configuration scripts can be saved and used to
restore known-good configurations.
NOTE
A configuration file cannot be used to update a single parameter. Importing a configuration file
will update all parameters that the current user has permission to change. Any parameters
missing from the configuration file on import will be assumed by the radio to be deleted. Make
certain that all necessary parameters are kept in the configuration file unless they are expected
to be deleted.
Configuring - Export
The following example shows how to have the device export the current configuration and download that
configuration to a local file through the web browser.
Navigate to System / Config Files ---> Actions / Export Configuration
Click on the Begin Exporting button once the file destination is configured.
The MCR supports file downloads through a web browser to a local file on the user's PC. The MCR also
supports FTP, TFTP, and SFTP file uploads using external remote servers.
File Destination - File transfer method to use. Available choices are To Local File
(DEFAULT), To FTP Server, To TFTP Server, and To SFTP Server. Local file downloads are
only available through the web UI and not through the CLI
182
Figure 3-94. Export Configuration
MDS Orbit MCR/ECR Technical Manual
MDS 05-6632A01, Rev. F
Advertisement
Table of Contents
Troubleshooting
