Enabling Qos; Naming A New Classifier; Qos Classifier Configuration - GE MDS ORBIT MCR Technical Manual

Using the Web UI
Example: Prioritize traffic with a particular ether-type above all other traffic
This example will create a QoS policy that uses a classifier to prioritize GOOSE messages above all
others.
First, navigate to QoS Services ---> Basic Config. Ensure that QoS is Enabled.
Figure 3-211. Enabling QoS
To create a classifier for GOOSE messages, click Add in the Classifier submenu. The Configure
Classifier Details appears.
Figure 3-212. Naming a new classifier
Give the new classifier a name and click the Add button. A menu bearing the classifier's name appears to
configure it.
Figure 3-213. QoS classifier configuration
The following options are available on the classifier menu.

Match Type – All, Any.
- All – Match all match rules if there is more than one match rule in the classifier.
292 MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F