Creation Of A Filter Rule To Allow All Traffic; Interface Selection Menu - GE MDS ORBIT MCR Technical Manual

Figure 3-132. Creation of a filter rule to allow all traffic
Since there are no more filters to add, click Next to proceed to Interface Selection.
Figure 3-133. Interface Selection Menu
The Interface Selection menu shows each network interface and IPsec connection present on the device.
When the Firewall service is running, each network interface and IPsec connection on the device must be
assigned an input and output packet filter. Otherwise, no traffic will flow. By default, each network
device uses IN_TRUSTED and OUT_TRUSTED as filters. Since the filters just created in this example
are intended for the cellular interface, click the In dropdown box next to the Cell interface and select the
newly created input filter. Next, click the Out dropdown next to the Cell interface and select the newly
created output filter. Click Next to continue.
MDS 05-6632A01, Rev. F MDS Orbit MCR/ECR Technical Manual 223