Network Setup - Cisco 7800 series Administrator's Manual

Item
Boot Load ID
Version
Hardware Revision
Serial Number
Model Number
Message Waiting
UDI
Time
Time Zone
Date
System Free Memory
Java Heap Free Memory
Java Pool Free Memory
FIPS Mode Enabled

Network Setup

The Network Setup area on a phone web page displays network setup information and information about
other phone settings. The following table describes these items.
You can view and set many of these items from the Network Setup menu on the Cisco IP Phone.
Description
Indicates the boot load version.
Identifier of the firmware that is running on the phone.
Revision value of the phone hardware.
Unique serial number of the phone.
Model number of the phone.
Indicates whether is a voice message is waiting on the primary line for this phone.
Displays the following Cisco Unique Device Identifier (UDI) information about
the phone:
• Device Type: Indicates hardware type. For example, phone displays for
all phone models.
• Device Description: Displays the name of the phone associated with the
indicated model type.
• Product Identifier: Specifies the phone model.
• Serial Number: Displays the unique serial number of the phone.
Time for the Date/Time Group to which the phone belongs. This information
comes from Cisco Unified Communications Manager.
Time zone for the Date/Time Group to which the phone belongs. This information
comes from Cisco Unified Communications Manager.
Date for the Date/Time Group to which the phone belongs. This information
comes from Cisco Unified Communications Manager.
Amount of available system memory.
Amount of free memory for the Java heap.
Amount of free memory for the Java pool.
Indicates if the Federal Information processing Standard (FIPS) Mode is enabled.
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Cisco IP Phone Web Page
189