Determine Phone Mac Address - Cisco 7800 series Administrator's Manual

c) Set up the speed dial information.
d) Select Save.
Step 15 Configure Cisco IP Phone services and assign services. Select Device > Device Settings > Phone Services.
Provides IP Phone services to the phone.
Note
Step 16 (Optional) Assign services to programmable buttons. Select Device > Device Settings > Phone button
template.
Provides access to an IP phone service or URL.
Step 17 Add user information to the global directory for Cisco Unified Communications Manager. Select User
Management > End User, and then click Add New and configure the required fields. Required fields are
indicated by an asterisk (*).
Note
a) Set the User ID and last name fields.
b) Assign a password (for Self Care Portal).
c) Assign a PIN (for Cisco Extension Mobility and Personal Directory).
d) Associate the user with a phone.
Provides users with control over their phone such a forwarding calls or adding speed-dial numbers or
services.
Note
Step 18 Associate a user with a user group. Select User Management > User Settings > Access Control Group.
Assigns users a common list of roles and permissions that apply to all users in a user group. Administrators
can manage user groups, roles, and permissions to control the level of access (and, therefore, the level of
security) for system users. For more information, see
In order for end users to access the Cisco Unified Communications Self Care Portal, you must add users to
the standard Cisco Communications Manager End Users group.
Related Topics
Cisco Unified Communications Manager Documentation, on page xiii

Determine Phone MAC Address

To add phones to the Cisco Unified Communications Manager, you must determine the MAC address of a
Cisco IP Phone.
Procedure
Perform one of the following actions:
Users can add or change services on their phones using the Cisco Unified Communications Self Care
Portal.
If your company uses a Lightweight Directory Access Protocol (LDAP) directory to store information
on users, you can install and configure Cisco Unified Communications to use your existing LDAP
directory, see Corporate Directory Setup, on page
LDAP Server field is enabled, you will not be able to add additional users from Cisco Unified
Communications Manager Administration.
Some phones, such as those in conference rooms, do not have an associated
user.
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Determine Phone MAC Address
167. After the Enable Synchronization from the
Add User to End User Group, on page 51.
47