Barge; Cisco Ip Phone 7800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 7800 series Administrator's Manual

Field Name Field Type
or Choices
PC Port Remote Disabled
Configuration
Enabled
SSH Access Disabled
Enabled
Incoming Call Toast Integer 3, 4, 5, 6, 7, 8,
Timer 9, 10, 15, 30, 60
seconds
Line Key Barge cBarge
Turn on Softkey

Barge

Off
Ring Locale Default
Japan
TLS Resumption
Integer 0–3600
Timer seconds
FIPS Mode Disabled
Enabled
HOLD/RESUME HOLD/RESUME Key
Key
HOLD Key
Default Description and Usage Guidelines
Disabled Allows you to configure the speed and duplex function of the
phone PC port remotely. This enhances the performance for
large deployments with specific port settings.
If the ports are configured for Remote Port Configuration in
Cisco Unified Communications Manager, the data cannot be
changed on the phone.
Disabled Controls the access to the SSH daemon through port 22.
Leaving port 22 open leaves the phone vulnerable to Denial
of Service (DoS) attacks.
5 Gives the time, in seconds, that the toast displays. The time
includes the fade-in and fade-out times for the window.
cBarge Controls the ability for a user to join a nonprivate call on a
shared phone line.
Default Controls the ringing pattern.
3600 Controls the ability to resume a TLS session without repeating
the entire TLS authentication process. If the field is set to 0,
then the TLS session resumption is disabled.
Disabled Enables or disables the Federal Information Processing
Standards (FIPS) mode on the phone.
HOLD/RESUME Controls the text for the Hold softkey.
Key

Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager

Phone Feature Configuration
• cBarge—Enables a user to add another person to a call.
The call automatically converts to a conference, allowing
the user and other parties to access conference features.
• Turn on Softkey—Enables a user to conference into a
call on a shared line using cBarge.
• Barge—Enables a user to add another user to a call but
does not convert the call into a conference.
• Off—Disables barge. A new call initiates when the user
presses the line key.
• HOLD/RESUME Key—The softkey displays
Hold/Resume.
• HOLD Key—The softkey displays Hold.
139