Cisco Ip Phone 7800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 7800 series Administrator's Manual

Hide thumbs Also See for 7800 series:
Table of Contents

Advertisement

Phone Feature Configuration
Field Name
Field Type
or Choices
Phone On Time
hh:mm
Phone Off Time
hh:mm
Phone Off Idle
hh:mm
Timeout

Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager

134
Default
Description and Usage Guidelines
Determines when the phone automatically turns on for the days
that are in the Enable Power Save Plus field.
Enter the time in this field in 24-hour format, where 00:00 is
midnight.
For example, to automatically power up the phone at 07:00
a.m. (0700), enter 07:00. To power up the phone at 02:00 p.m.
(1400), enter 14:00.
The default value is blank, which means 00:00.
The Phone On Time must be at least 20 minutes later than the
Phone Off Time. For example, if the Phone Off Time is 07:00,
the Phone On Time must be no earlier than 07:20.
Defines the time of day that the phone powers down for the
days that are selected in the Enable Power Save Plus field. If
the Phone On Time and the Phone Off Time fields contain the
same value, the phone does not power down.
Enter the time in this field in 24-hour format, where 00:00 is
midnight.
For example, to automatically power down the phone at 7:00
a.m. (0700), enter 7:00. To power down the phone at 2:00 p.m.
(1400), enter 14:00.
The default value is blank, which means 00:00.
The Phone On Time must be at least 20 minutes later than the
Phone Off Time. For example, if the Phone Off Time is 7:00,
the Phone On Time must be no earlier than 7:20.
For more information, see
Indicates the length of time that the phone must be idle before
the phone powers down.
The timeout occurs under the following conditions:
• When the phone was in Power Save Plus mode, as
scheduled, and was taken out of Power Save Plus mode
because the phone user pressed the Select key.
• When the phone is repowered by the attached switch.
• When the Phone Off Time is reached but the phone is in
use.
Set Up Idle Display, on page
108.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents