Cisco IP Phone Status
Item
CDP Neighbor Device ID
CDP Neighbor IP Address
CDP Neighbor IPv6 Address
CDP Neighbor Port
Restart Cause: One of these values:
• Hardware Reset (Power-on reset)
• Software Reset (memory controller
also reset)
• Software Reset (memory controller
not reset)
• Watchdog Reset
• Unknown
Port 1
Port 2
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
182
Description
Identifier of a device connected to this port discovered by CDP
protocol.
Identifier of a device connected to this port discovered by CDP
protocol using IP.
Identifier of a device connected to this port discovered by CDP
protocol using IPv6.
Identifier of a device connected to this port discovered by CDP
protocol.
Cause of the last reset of the phone
Link state and connection of the PC port (for example, Auto 100
Mb Full-Duplex means that the PC port is in a link-up state and
has auto-negotiated a full-duplex, 100-Mbps connection)
Link state and connection of the Network port