Request Information From The Phone In Xml - Cisco 7800 series Administrator's Manual

Request Information from the Phone in XML

Item
Receiver Report Time
Received
(see note)
When the RTP Control Protocol is disabled, no data generates for this field and thus displays as 0.
Note
Request Information from the Phone in XML
For troubleshooting purposes, you can request information from the phone. The resulting information is in
XML format. The following information is available:
• CallInfo is call session information for a specific line.
• LineInfo is line configuration information for the phone.
• ModeInfo is phone mode information.
Before You Begin
Web access needs to be enabled to get the information.
The phone must be associated with a user.
Procedure
Step 1 For Call Info, enter the following URL in a browser: http://<phone ip address>/CGI/Java/CallInfo<x>
where
• <phone ip address> is the IP address of the phone
• <x> is the line number to obtain information about.
The command returns an XML document.
Step 2
For Line Info, enter the following URL in a browser: http://<phone ip address>/CGI/Java/LineInfo
where
• <phone ip address> is the IP address of the phone
The command returns an XML document.
Step 3 For Model Info, enter the following URL in a browser: http://<phone ip address>/CGI/Java/ModeInfo
where
• <phone ip address> is the IP address of the phone
The command returns an XML document.
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
202
Description
Most recent time when an RTCP Receiver Report was received.