Set SW Port Setup Field
Procedure
Step 1
Scroll to the SW Port Configuration option and press Edit.
Step 2
Scroll to the setting that you want and press Select.
Set PC Port Setup Field
Procedure
Step 1
Scroll to the PC Port Setup option and press Edit.
Step 2
Scroll to the setting that you want and press Select.
Set DHCP Enabled Field
Procedure
Step 1
Scroll to the DHCP Enabled option.
Step 2
Press Edit.
Step 3
Press Disable to disable DHCP, or press Enable to enable DHCP.
Step 4
Press Back .
Set IP Address Field
Procedure
Step 1
Set the DHCP Disabled option to Disable.
Step 2
Press , scroll to the IP Address option, press Select, and enter a new IP Address.
Step 3
Press Validate, and then press Apply to apply the changes or Revert to discard the changes.
What to Do Next
You must set the Subnet Mask Field and the Gateway.
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Configure Network Settings
37