Dog trace d-fence 6th SENSE User Manual page 9

Checking the battery power
LED indicator situated on the receiver's front cover under the sign "d-fence"
indicates the status of the battery. Red light indicates low battery. Prepare
a spare 3V lithium battery CR2 and follow the instructions described in the
section Battery insertion and replacement.
Stimulation impulse setting
The d-fence receiver is activated as soon as the dog wearing the collar
enters the prohibited zone, the receiver starts to emit warning beep
sounds. If the dog continues to move forward towards the antenna wire
the collar emits stimulation impulses. There are 9 modes available on the
receiver - 8 stimulation levels and ISIT function (mode 9). We recommend
to start with the low level (mode 1) and increase it gradually to define the
stimulation level at which the dog reacts.
The supplied magnet allows you to adjust the stimulation impulse level.
The receiver must be switched on (battery is inserted).
■
Place the magnet to a target marked on the receiver.
■
The receiver starts to starts to beep. The number of emitted beeps in the
■
sequence indicates the mode (1-9).
When setting the mode 9 (ISIT function), different beep tone is emitted.
■
After the required mode is set, move the magnet away from the receiver.
■
The mode configuration is saved.
■
9