Dog trace d-fence 6th SENSE User Manual page 17

Electronic invisible fence
Table of Contents

Advertisement

antenna wire about 30 cm above the ground or as high as where the dog
wears the receiver. Adjust the zone setting (0 - 600) on the transmitter
unit by pressing the
impulses together with the sound signals at approximately one second
intervals. The stimulation impulses are indicated by the test discharge
lamp.
Important: The maximum widths of the zones vary depending on the
length of the antenna wire laid out on the property. The longer the
antenna wire, the narrower the zones. It is very important the dog wears
the receiver with the sign ''d-fence'' towards the antenna wire so the
sign is visible. This is important for the correct function of the receiver.
1 - Warning zone setting 2 - Correction zone setting
3 - Back-up battery pack power indicator 4 - Antenna wire indicator
Back-up battery power indicator
The back-up battery indicator (at the right bottom corner of the screen)
displays the status of the back-up battery pack in four stages.
-
Transmitter unit is connected to power outlet (the back-up battery
pack is charging).
-
Transmitter unit is powered by the back-up battery pack - the
back-up battery pack is fully charged.
-
Transmitter unit is powered by the back-up battery pack - the
back-up battery pack is low.
buttons until the receiver emits stimulation
4
1
2
3
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents