Table of Contents
Advertisement
3. Operation
3.5 Personalization
Function
Personalization parameters can be set and modified using the "UPS Driver" software installed on a computer
that is connected to the UPS (see section 2.3 Connection to the RS 232 communications port).
Check that the RS 232 cable
is closed.
"UPS Driver" installation:
1 - Insert the Solution-Pac CD-ROM containing the UPS Driver software in the drive of a PC running
Windows.
2 - Open the Windows File manager or Explorer and select the CD-ROM drive.
3 - Double-click "\Emb\Index.htm", then "UPS Driver".
Once "UPS Driver" has been installed, UPS parameters can be modified in a window containing
a number of tabs, each presenting a set of parameters.
"ON / OFF conditions" tab
Personalizable function
Cold start (battery power)
UPS ON / OFF via software
Page 22 -
51033211EN/AC
is correctly connected and that the battery circuit breaker
25
Automatic start
Forced shutdown
Sleep mode
Default setting
Enabled
Enabled
Enabled
Disabled
Enabled
8
Advertisement
Table of Contents
