Personalization (Optional); Function; On / Off Conditions" Tab; Battery" Tab - MGE UPS Systems Pulsar EX 700RT Installation And User Manual

3.4 Personalization (optional)

Function

Personalization parameters can be set and modified using the UPS Driver software installed on a computer that is
connected to the UPS (see section 2.4 Connection to the RS232 communication port, page 13).
NOTE: Check that the RS232 cable 30 is properly connected.
UPS Driver installation:
1. Insert the Solution-Pac CD-ROM containing the UPS Driver software into the computers CD ROM drive.
2. Open the file Manager and select the CD-ROM drive.
3. Launch "\Emb
IMPORTANT: You can download the software UPS Driver from the www.mgeups.com as well, or contact an
MGE representative in your area. Once UPS Driver has been installed, the UPS parameters listed below can be
modified.

"ON / OFF conditions" tab

"Battery" tab

Protection against deep discharges
\
Config\UPSDRVxx.exe" (xx = software version).
Personalization function
Automatic start
Cold start (battery power)
Forced shutdown
Sleep mode
UPS ON / OFF via software
Personalization function
Automatic "Battery test" intervals
"Low-battery warning" threshold
Default setting
Enabled
Enabled
Enabled
Disabled
Enabled
Default setting
Every weeks
20% remaining From 0% to 100% of the remaining
battery backup time
Enabled
3. Operation
Options
Disabled
Disabled
Disabled
Enabled
Disabled
Options
Once a day
Once a month
No test
battery backup time
Disabled
- Page 17
86-153850-00 A01