Bosch C 60 Manual page 86

C 60 Analog and Frequency Inputs
Analog Inputs – Measurement Channels
For each analog channel, several 'subchannels' are available

raw_name

raw_name_fi

name

name_fi

Filtered channels are routed through digital low pass filters

C 60 uses A/D converter oversampling and digital filtering to recording rate

Digital filters eliminate 'out-of-band' noise

Cut-off frequency automatically adjusted to recording rate

Linear phase – no signal distortion

Latency compensation – no filter delay in recorded data

:
Motorsport
86
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
mV value of sensor
filtered mV value of sensor
physical value of sensor
filtered physical valuexxx