Bosch C 60 Manual page 154

C 60 Recording and Telemetry
Configuration of Online Telemetry
Software Setup

Adding channels to telemetry

In the 'Edit Recording Channels' dialog: choose 'Telemetry'

• None – channel(s) are not transferred
• Slow – channel(s) are transferred in the slow telemetry block
• Fast – channel(s) are transferred in the fast telemetry block
Motorsport
154
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Why fast block / slow block

C 60 telemetry uses available FM40 bandwidth

(19200 baud -> approx. 1700 bytes/s)
Channels are grouped into blocks

Fast block (block 1): transferred every cycle

Slow blocks (block 2..n): transferred every n

Block 1 Block 2 Block 1 Block 3
Transmission Scheme
Block 1 Block 4 Block 1 Block 2
th
cycle