Table of Contents
Advertisement
C 60 Online Measurement
C 60 Online Measurement + Calibration
Online calibration of multi-point adjustment channels
Click on 'Calibrate adjustment points' to open calibration window
Apply the desired physical condition to the sensor (e.g. by applying a force on the wheel)
Enter the physical value in the value column of the desired calibration point (e.g. 745N)
Press the 'Calibrate' button of the desired calibration point
Repeat for all curve points
Click 'Close' when done
Motorsport
128
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Advertisement
Table of Contents
