Bosch C 60 Manual page 189

GPS Sensor
GPS Sensor
GPS (Global Positioning System)

Space-based global navigation satellite system

GPS provides positioning, navigation, and timing services to worldwide users

GPS receiver (sensor) gives digital information about position (longitude, latitude, height), ground

speed, course, and status
Two types of GPS receivers

CAN output -> Read in messages via CAN Input of C 60 (not covered here)

Serial output -> Read in messages via RS232 Interface of C 60 (serial interface 2)

Serial Interface is characterised by:

Voltage levels



Baud rate




Data format


Motorsport
189
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
RS232 is standard (+/-12V)
UART (0V/5V) needs level shifter
9600 is standard for GPS, C 60 supports 1200...115200
GPS Rx interface baud rate must match DDU interface baud rate
C 60 Baud rate can be set with the GPS_BAUDRATE characteristic
C 60 expects 8 data bits, no parity bit, 1 stop bit (8N1)