Table of Contents
Advertisement
Fuel Consumption Calculation
Fuel Consumption
Setting up fuel consumption calculation and tank management for C 60
A fuel consumption wizard opens
Press 'Finish' to complete the operation
Motorsport
196
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Tank capacity of vehicle
Select calculation mode here
•
Using fuel consumed (summed-up fuel consumption)
•
Using flow rate (momentary fuel consumption)
Select input channel and adaption factor here
Use adaption factor to adapt value of input channel to
•
1ml per inc for summed-up fuel consumption
•
1ml / s per inc for momentary consumption
Factor to correct calculated consumption in C 60 vs. 'real'
consumption of vehicle
Remaining laps with fuel in tank can be calculated
•
Using fuel consumption of last lap completed
•
Using target lap consumption (entered here)
Reset of fuel consumption values can be initiated
•
Manually using RaceCon
•
Using an input channel (e.g. a switch connected to input pin)
•
By 'power off' (assuming that the tank is filled each time the
ignition is turned off)
Advertisement
Table of Contents
