Bosch C 60 Manual page 142

C 60 Recording on USB Memory
Setup for USB recording
Enable the software upgrade for USB recording

USB recording is enabled by the 'Software Upgrade 4'

Note: for USB recording, Software Upgrade 1 also has to be enabled

To activate 'Software Upgrade 4', enter the license key as described in the

chapter 'Starting up the C 60', section 'Feature activation' of this manual
Wiring harness

Storage Device

To ensure reliable operation, use Bosch Motorsport USB devices only

(Part Number F 02U V00 867-01 - 2GByte capacity)
The Bosch Motorsport USB devices are preformatted with the Bosch File System (BFS)

A device is recognized by Windows as a 'storage medium',

but it can only be initialized with RaceCon and read with WinDARAB
Motorsport
142
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
C 60 ASDD-2-12-41PN (Red)
Pin 23
Pin 24
Pin 25
Pin 26
*colors matching a standard USB cable
USB
Power (red)
D+ (green)
D – (white)
GND (black)