Bosch C 60 Manual page 159

C 60 Recording and Telemetry
Configuration of Burst Telemetry
Software Setup

Configure the burst IP address of the C 60

(This address must be compatible with the address range of the pit PC, the BT-60 and the BR-60)
Open a measurement sheet

Drag the 'BURST_DEVICE_IP' to the measurement sheet

Switch to 'Race Mode'

Configure the desired IP address

Motorsport
159
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Drag+drop