Bosch C 60 Manual page 41

C 60 Start-Up
C 60 1 st
Start the WinDARAB software

Disconnect the C 60 network cable

Hold the 'Shift' key and click on the 'Import Measurement Data' Icon

Select the 'Data logger C 60' and click 'OK' when done

Click here
Motorsport
41
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Recording