Ethernet Channels; Rs232 Ports; Vehicle Diagnosis Connector - Bosch C 60 Manual

5.3.2 Ethernet Channels

The C 60 has three 100 MBit full duplex Ethernet communication ports. The ports are internally
connected with an Ethernet switch. The ethernet ports have 'cable auto crossover' functionality.

5.3.3 RS232 Ports

The C 60 has two RS232 serial ports. Baudrate for both ports is programmable. RS232 port 1 is
reserved for online telemetry, port 2 can be used for reception of data from a serial GPS receiver.

5.3.4 Vehicle Diagnosis Connector

The Bosch Motorsport vehicle diagnosis connector is used as a standard interface to connect the
vehicle to a PC e.g. via a MSA-Box II. Loom connector: AS 0-12-35SN
Pin Name
Pin 1 Terminal 30
Pin 2 Terminal 15
Pin 3 Terminal 31
Pin 4 CAN High
Pin 16 CAN Low
Pin 10 K-Line
Pin 8 Ethernet RxD +
Pin 9 Ethernet RxD -
Pin 11 Ethernet TxD +
Pin 12 Ethernet TxD -
Pin 22 Screen
8
Description
Permanent positive
Switched positive
GND
Diagnostic CAN bus
Diagnostic CAN bus
ECU diagnosis
Ethernet interface
Ethernet interface
Ethernet interface
Ethernet interface
Cable screen
Inputs and Outputs
Used for C 60
+
+
+
+
+
+
+
+